CARTA 3 — Set Screensavers – GIFs

CARTA 3 — Set Screensavers – GIFsYouTube

The CARTA 3 allows you to personalize your device by setting custom screensaver images. Using the Focus V app, you can upload photos directly from your phone, choose separate primary and secondary images, or use the same image for both. You can also customize how long the screensaver remains visible before the display turns off.

Before You Begin

• Turn on your CARTA 3.
• Make sure your device is connected to the Focus V app.
• Sign in to your Focus V account if you are not already logged in. You may be prompted to update firmware - that is fine and intended if you have not updated your device recently.

Customize Your Screensaver

1. Open the Focus V App.
2. From the home screen, tap the Device tab at the bottom of the screen.
3. Select the Screensaver tile located in the upper-left corner.
4. Tap either the Primary file and/or Secondary file option.
5. Choose a GIF directly from your phone's photo library.
6. Repeat the process if you'd like to use a different image for the second screensaver slot, or simply select the same image for both.

Adjust the Screensaver Timer

You can choose how long your custom screensaver remains visible before the display turns off. Available options include:

• 15 seconds
• 30 seconds
• 60 seconds

Select your preferred timeout duration from the Screensaver settings.

Save Your Changes

Once you've finished customizing your screensaver:

1. Tap Save.
2. Allow a few moments for the settings and images to transfer to your CARTA 3.
3. Once the transfer is complete, your new screensaver will be ready to use.

What Happens Next?

After your selected timeout period has elapsed, the display will automatically turn off. This is normal behavior and is designed to conserve battery life.

Tips

• You can use any compatible GIF from your phone's photo library.
• Use the same GIF for both the primary and secondary screensaver if you prefer a consistent appearance.
• If you update your screensaver later, simply repeat the steps above and save your changes again.