CARTA 3 — Removing and Reinstalling the CONNECT

CARTA 3 — Removing and Reinstalling the CONNECTYouTube

The CARTA 3 features a removable CONNECT airpath, designed to make maintenance and cleaning easier. Whether you're removing the CONNECT airpath for routine cleaning or simply need to reinstall it, the process is quick and straightforward. Following the proper removal and installation steps helps ensure all components remain securely connected and your CARTA 3 continues performing at its best.

Instructions

1. 1
   Power Off Your CARTA 3

   Before beginning, make sure your CARTA 3 is completely powered off and has cooled down before handling any components.

2. 2
   Remove the Glass Top

   Carefully remove the glass top from the CARTA 3 base. Set the glass top aside in a safe location to prevent accidental damage.

3. 3
   Remove the INTELLI-CORE 3 Atomizer

   Carefully unscrew the INTELLI-CORE 3 Atomizer from the CARTA 3 base. Set the atomizer aside in a safe location.

4. 4
   Remove the CONNECT Airpath

   Once the glass top and atomizer have been removed, gently lift the CONNECT airpath from the front of the CARTA 3 base. Avoid applying excessive force when removing the component.

5. 5
   Reinstall the CONNECT Airpath

   When you're ready to reinstall the CONNECT airpath, carefully align it with its designated position on the CARTA 3 base. Gently press the CONNECT airpath back into place, ensuring it is securely seated.

6. 6
   Reassemble Your CARTA 3

   Once the CONNECT airpath is securely installed: Reinstall the INTELLI-CORE 3 Atomizer until snug, without overtightening. Carefully secure the glass top back onto the CONNECT airpath. Make sure all components are properly seated before using your device. Your CARTA 3 is now reassembled and ready for your next session!

Tips

• Always power off your CARTA 3 and allow it to cool before removing any components.
• Remove the glass top and atomizer before attempting to detach the CONNECT airpath.
• Avoid using excessive force when removing or reinstalling the CONNECT airpath.
• Make sure the CONNECT airpath is properly seated before reattaching the atomizer and glass top.
• Regularly inspect the CONNECT airpath for concentrate buildup and clean it as needed.