WATCH THE VIDEO: https://youtube.com/shorts/att3sMVcOCc

To Remove the CONNECT, first, take off the glass top and atomizer. Grab the front of the CONNECT and gently pull it up before lifting from the center to remove it completely.

To Install the CONNECT:
1) Start by making sure the atomizer and glass top are removed.
2) Line up the airpath with the base.
3) Snap the back end into place first.
4) Then push down the front so it fits snugly.
5) Once it’s locked in, reinstall the atomizer and glass top.

That’s it—you’re all set.