Unlock the full potential of your AERIS with this comprehensive guide. From powering on to tailoring your session settings, this article breaks down every essential function, ensuring you achieve the optimal experience. Whether you're a first-time user or looking for a quick refresher, these instructions will help you seamlessly navigate your device and get the most out of every session.

*Ensure your AERIS is fully charged before use.*

1. Powering On & Off:

• To Power On: Press the “V” button five times consecutively. The device will vibrate, and the LEDs will illuminate in green.
• To Power Off: Press the “V” button five times again. The device will vibrate and display a concluding green LED sequence.
  • Note: The LEDs will deactivate after 5 minutes of inactivity, and the AERIS will auto-shutdown after 10 minutes.

2. Initiating a Session:

• After turning on the AERIS and adjusting your desired settings, double-press the "V" button. A vibration and LED indicators confirm the session initiation.
• The device will vibrate once more upon reaching the set temperature.
• Note: During your session, double-click the "V" button to extend by 10 seconds. To terminate the session early, press the "V" button once.

3. Session Settings:

• Press the "V" button once, then again after a short interval to cycle through the temperature settings: Blue (425F), Yellow (450F), Green (475F), Purple (500F), and Red (525F).
• For a customized temperature experience, you can utilize the CARTA App. Assistance with the app can be found here.

4. LED Preferences:

• Press the "V" button three times in rapid succession to access LED modes. Press it once more to cycle through the five presets, which also includes a discreet ghost mode.

5. Battery Level Check:

• To gauge battery life, press the "V" button four times.
• Green indicates approximately 75% battery life.
• Blue signifies around 50%.
• Yellow denotes 25%.
• Red suggests it's time to recharge with only about 10% remaining.