Calibrating the Intelli-Core for Oil Atomizer
The Intelli-Core for Oil Atomizer is a versatile component of the CARTA device that requires occasional calibration to ensure optimal performance. This guide aims to provide step-by-step instructions on how to calibrate the Intelli-Core for Oil atomizer effectively.
Note: Calibration steps may vary slightly depending on the specific model and firmware version of your CARTA device. Please refer to the manufacturer's instructions for any model-specific guidance.
Step-by-Step Calibration Process:
1. Prepare the CARTA Device:
- Ensure that the CARTA device is turned off and disconnected from any power source.
- Remove any attachments or accessories from the device to access the atomizer easily.
2. Access the Intelli-Core for Oil Atomizer:
- Locate the Intelli-Core for Oil atomizer, which is the designated atomizer for oils and concentrates.
- Gently unscrew the top cap of the atomizer to expose the heating chamber.
3. Check Atomizer Connections:
- Inspect the connections between the atomizer and the device.
- Ensure that the atomizer is securely screwed into the designated connection point on the device.
- Clean any debris or residue from the threading or connection points using a cotton swab or isopropyl alcohol if necessary.
4. Reset the Atomizer Resistance:
- On the CARTA device, locate the power button and press it five times consecutively to turn on the device.
- Once the device is powered on, press the power button four times to access the atomizer settings.
5. Enter Calibration Mode:
- On the fourth press of the power button, continue holding it until you enter the calibration mode.
- The device's display or LED lights may indicate that calibration mode has been activated.
6. Follow On-Screen Prompts:
- Pay attention to any on-screen prompts or LED light patterns that guide you through the calibration process.
- Depending on your device model and firmware version, you may be prompted to perform specific actions or wait for certain indications.
7. Complete Calibration:
- Follow the instructions provided by the device to complete the calibration process.
- The device may automatically adjust the resistance based on the atomizer's current state.
8. Verify Calibration Success:
- After completing the calibration process, the device should indicate whether the calibration was successful.
- Check the device's display or LED lights for any confirmation messages.
9. Test and Enjoy:
- Once the calibration process is complete, reassemble the atomizer and attach it securely to the CARTA device.
- Load your desired oil or concentrate into the atomizer's heating chamber.
- Power on the CARTA device, set your preferred temperature and enjoy your vaping experience with the calibrated Intelli-Core for Oil atomizer.
Calibrating the Intelli-Core for Oil atomizer is a straightforward process that ensures optimal performance and a satisfying vaping experience with your CARTA device. By following the step-by-step instructions provided in this guide, users can effectively calibrate the atomizer and enjoy consistent heating results.